CAPACITIES
Technical Data
The shipyard covers total area of 120.000 sq.m. It is enabled to accomodate and repair vessels up to 120.000 DWT.
Floating Docks
Cranes
Wharf
Workshops
Office Building and Training Center
Main data on floating docks
DOCK - 6
Length over all: 184.0 m.
Distance Between towers: 26.8 m.
Dock lifting capacity: 10,000 t.
Crane lifting capacity: 2 x 7.5 t.
DOCK - 12
Length over all: 250.0 m.
Distance Between towers: 45.2 m.
Dock lifting capacity: 33,000 t.
Crane lifting capacity: 2 x 12 t.
( back to top )
Cranes
Total number of cranes: 26.
Lifting capacity of cranes: from 2.5 to 50 t.
- Traveling cranes (5-25 t): 9 units.
- Portal cranes in workshops (2.5-40 t): 14 units.
- Mobile cranes (8-50 t): 3 units.
( back to top )
Wharf
Total lenght of the wharf: 1120 m (800m + 320m).
- Distribution of all types of energy supply.
- Four portal cranes of 25 t and one crane of 10 t lifting capacity.
( back to top )
Workshops
Enclosed workshops: 14 000 sq.m. total area: connected to all energy supplies and equipped with 14 bridge cranes of 2.5-40 t lifting capacity.
Divisions: ship mechanics and machining, electromechanical, lockhsmith-piping, steel construction, anticorrosive potection, maintenance and energetic.
Outdoor working platforms: 4 600 sq.m. total area: connected to all energy supplies and equipped with two 25 t portal cranes and three 8-50 t auto-crane.
Repair possibilities: cleaning and painting, piping and fittings, steel works, engine and equipment works, deck equipment, carpentry, electrical works.
Divisions - Details:
Ship mechanics and machining division with its technical facilities and sufficient premises area provide basis for the repairs of any part of main and auxiliary vessel engines, pumps and other gears and mechanisms. With regard to machining, it includes stern-tube bearing and rudder machining on spot and shafts machining utilising a digitally controlled "Skoda" lathe with a 12 m points span and 45 tons shaft weight.
Electro-mechanical division, besides all types of electrical installations, deals with the repairs of main distribution board and any type and size of electromotors including rewinding, varnishing and drying, testing generators load and megger- testing.
Locksmith-piping division undertakes any type of locksmith and piping work including any pipe diameter and material along with boiler pipes replacement.
Steel construction division repairs steel constructions of vessel's hull in an efficient and effective way, complying with the procedures approved by ISO Standard and Classification Societies for joints welding and testing.
Anticorrosive protection division effectively prepares the areas (sandblasting and slurryblasting up to SA2,5) supervising the application of contemporary paints supplied to theYard by "Hempel's Marine Paint International" via the consignment paint stocks.
( back to top )
Office Building and Azalea Maritime Training Center
The Maritime Training Center is located in the new business building of the Shipyard. It has valuable and modern equipment, with basic activity in educating seamen and shipyard workers under international norms and standards. The main investor is Azalea Maritime Agency B.V. Rotterdam, for Mitsui O.S.K. Lines. Japan.
Contact:
AZALEA Maritime LLC, Montenegro
info@azalea-maritime.com
( back to top )